|
|
|
Categories
|
|
Information
|
|
Featured Product
|
|
|
 |
|
|
There are currently no product reviews.
 ;
Very good quality. Some parts are not fully readable, but the fundamental ones are fine.
;
very good quality readable manual,printed off very well.
;
The manual was very accurate for the part that I was changing, I was able to order the correct part and had no issues with the replacement procedure. However, I was expecting to have more detailed repairs for the lower drive unit.
 ;
I needed the manual immediately and I got it immediately. I couldn't find this manual anywhere else on the net. The site was easy to traverse, and the price was very reasonable. I'll definitely be back for any future needs.
;
I received a good service manual, with good resolution. Improve the instructions for the purchase because they are not well understood.
For the rest, so good.
Thanks Angel.
DISASSEMBLY
1. TILT/SWIVEL REMOVAL 1) Set the monitor face downward. 2) Pressing the latch (a), carefully remove the Tilt/Swivel by pulling it upward. 2. BACK COVER REMOVAL 1) Remove four screws (a). 2) Slide the Back Cover away from the Front Cabinet of the monitor.
(a) (a) (a) (a) (a)
3. TOTAL CHASSIS ASSEMBLY REMOVAL 1) Remove connector (a) from the DY Assembly screw. 2) Disconnect P2(CDT EATH) and four pins (b) from the Video PCB. 3) Carefully separate the CDT Board Assembly from the CDT neck. 4) Discharge the remaining static electricity by shorting between the Anode Cap and the CDT ground. 5) Disconnect the Anode Cap from the CDT. 6) Disconnect P902 (Degaussing pin), P701 (DY pin), and P501 from the Main PCB. 7) Remove four screws (c). 8) Remove the Total Chassis
M ENU SEL
Anode Cap
(b)
DY Assembly Screw
(a)
(b)
P2
(c)
P701
(c)
P702 P402 P902 P501
Assembly from the Main Frame.
EC
T
(c)
(c)
- 11 -
|
|
|
> |
|
|
Parse Time: 0.215 - Number of Queries: 134 - Query Time: 0.041
